21
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFETY WARNINGS. *IF EQUIPPED †LEGAL DISCLAIMERS ON BACK INSIDE COVER
Electronic Stability Control (ESC)
†9
The ESC system is designed to help stabilize the vehicle during certain
cornering maneuvers. It is a good idea to keep ESC turned ON whenever
possible.
Press ESC OFF button
B
to disable Traction Control in ESC (ESC OFF
indicator will illuminate).
To turn both Traction Control and Stability Control off, press and hold ESC
OFF button
B
(ESC OFF indicator will illuminate, and an alert sounds).
REMINDERS:
• ESC is active by default at vehicle startup
• The ESC Indicator Light in the instrument cluster will illuminate whenever the ESC is in
operation
For more information on Electronic Stability Control (ESC) and its specific features and
operations, please refer to your Owner’s Manual.
HAC does not replace the need to apply brakes while the vehicle is stopped on an incline.
Instrument Cluster Control
Press switch
A
up or down to
adjust display brightness of the
instrument panel illumination.
Hill-Start Assist Control (HAC)
†9
The HAC system is designed to help prevent the vehicle from rolling
backward when accelerating from a stop while on a steep incline.
The HAC system automatically activates whether the ESC is OFF or ON but
does NOT activate when the ESC has malfunctioned.
REMINDERS:
• The HAC system does not operate when the Rotary Dial Shifter Knob is in the P (Park)
or the N (Neutral) position
• In the event of an HAC system malfunction, see an Authorized Kia Dealer for service
•
• When HAC is active (e.g., accelerating from a stop on an incline), you may
notice that the brakes will momentarily remain engaged after you depress the
accelerator. This is normal HAC operation
• HAC provides a two-second delay before the vehicle may start rolling backward
QUICK TIPS
(Buttons are located left of the Steering Wheel)
BA
DRIVER'S PANEL
To Next Page
Loading...
