Kia niro ev - Steering Wheel Controls; Headlights & High Beams; Turn Signals & Fog Lights

24
*IF EQUIPPED
NIRO EV FEATURES & FUNCTIONS GUIDE
Headlight position ON
Parking light position
AUTO*
Auto Light Position /
Daytime Running Lights (DRL)
DRL
*
OFF
Headlight / DRL* OFF position
Headlights & High Beams
To operate:
• Rotate lever to change the Headlight function
• Push lever to turn High Beams ON
• Pull lever to flash Headlights/High Beams
AUTO Light position – When the light switch is in the AUTO Light position,
the tail lights and headlights will turn ON/OFF automatically depending on
the amount of light outside the vehicle.
Daytime Running Lights (DRL)* – DRL may help others to see the front
of your vehicle during the day. The lights will be on automatically when the
ignition or POWER button* is ON and the headlight switch is in the AUTO
position, unless one of the following occurs:
• Parking brake is applied
• Engine is turned off
Turn Signals & Fog Lights*
To operate:
• Turn Signals - Move lever Up/Down for Right/Left Turn Signal
• Fog Lights - Press switch
A
to turn Fog Lights ON/OFF
One-Touch Lane Change Signal is activated
by moving the Turn Signal Lever slightly for
less than 1 second and then releasing. The
lane change signal will blink 3 times.
To change how many times (3/5/7 times) the Lane Change Signal
blinks, go to User Settings Mode in the LCD Instrument Cluster modes.
REMINDER: The DRL system turns off when parking brake is applied.
A
REMINDER: Headlights must be in the ON/AUTO position for Fog Light operation.
PUSH
PULL
STEERING WHEEL CONTROLS