Kia niro ev - Electronic Parking Brake

39
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFETY WARNINGS. *IF EQUIPPED
CENTER PANEL
(Located below left of Rotary Dial Shifter Knob)
Electronic Parking Brake (EPB)
The Electronic Parking Brake (EPB) system utilizes an electric motor
to engage the parking brake.
Applying the Parking Brake
Pull up the EPB switch
A
. Ensure that the indicator light
is illuminated on the instrument cluster.
Releasing the Parking Brake
The EPB will automatically release when the shifter is placed in
Reverse or Drive.
To release EPB manually, depress the brake pedal, then press the
EPB switch
A
, with the ignition switch in the ON position. Ensure
that the indicator light is O FF.
REMINDERS:
• As a bulb check, the EPB malfunction indicator will illuminate for approximately 3 seconds when the
ignition switch is turned ON
• If the warning light does not illuminate temporarily, or continues to remain lit, take your vehicle to an
authorized Kia dealer and have the system checked
• The EPB should not be operated while the vehicle is moving
• A click or electric brake motor sound may be heard while operating or releasing the EPB, but these
conditions are normal and indicate that the EPB is functioning properly
•
• When leaving your keys with parking lot attendants or valet, make sure to inform
them how to operate the EPB
• If parked on a steep incline/decline, pull up the EPB switch for more than 3 seconds
for a firmer EPB application
• Pull up and hold EPB switch again to increase brake pressure if parked on a decline
or incline
QUICK TIPS
Electronic Parking Brake
Video
To view a video on your
mobile device, snap this
QR Code or visit the listed
website.
Refer to page 2 for more
information.
QR CODE
www.youtube.com/KiaFeatureVideos
N
P
P
RELEASE
AUTO
HOLD
DRIVE
MODE
DR
A