EasyManua.ls Logo

Kia OPTIMA 2016 - Advanced Smart Cruise Control (ASCC)

Kia OPTIMA 2016
50 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
OPTIMA FEATURES & FUNCTIONS GUIDE
20
*IF EQUIPPED
To change the Cruise Control mode from ASCC to standard
Cruise Control, press and hold button
A
. Repeat to switch
modes again (The ASCC system must not be activated to
change modes).
For the ASCC System to operate:
When no vehicle is in front, you must be travelling at a
minimum speed of 19 mph
When following a vehicle, there is no minimum speed
requirement
When following a vehicle, the system will automatically adjust
your cruise speed based on the vehicle in front. It will even
bring the vehicle to a complete stop if necessary.
Advanced Smart Cruise Control (ASCC)*
The Advanced Smart Cruise Control (ASCC)* system allows you to set the vehicle
to maintain a speed so long as it is not limited by traffic. When trafc is encountered,
the vehicle will be slowed to maintain a set distance behind traffic without depressing
the accelerator or brake pedal.
To set/adjust the ASCC speed:
Push the CRUISE button
A
to turn system ON. The CRUISE indicator
will illuminate on the instrument cluster
Accelerate/decelerate to the desired speed
Move the ASCC lever
B
to set or adjust speed
To set the vehicle-to-vehicle distance, press the ASCC button
C
on the steering wheel.
The images on the LCD screen
D
and the Instrument Cluster
E
will change when
scrolling through the settings. Each time the button is pressed, the vehicle-to-vehicle
distance changes.
To turn system OFF, press the CRUISE button
A
. The CRUISE indicator on the instrument
cluster will turn OFF and the LCD screen ASCC image will show canceled
F
.
Advanced Smart Cruise
Control Video
To view a video on your
mobile device, snap this
QR Code or visit the listed
website.
Refer to page 2 for more
information.
www.KuTechVideos.com/jf13/2017
QR CODE
QUICK TIPS
REMINDERS:
Cruise Control button must be ON in order to turn ASCC ON/OFF
ASCC system is activated when ignition is turned on. Speed will need to be reset when ignition is cycled on
The distance settings are approximations and may vary depending on factory settings at the time. See owner’s
manual for more information
A
B
C
Smart Cruise Control
canceled
E
D
F
172ft 130ft
82ft
106ft
STEERING WHEEL CONTROLS
www.CarGarage.ir
www.CarGarage.ir
www.CarGarage.ir

Table of Contents

Related product manuals