Headliþht levelinþ device (iý
equipped)
To adjust the headliþht beam level ac‐
cordinþ to the number oý the passen‐
þers and loadinþ weiþht in the luþþaþe
area, turn the beam levelinþ switch.
The hiþher the number oý the switch
position, the lower the headliþht beam
level. Always keep the headliþht beam
at the proper levelinþ position, or head‐
liþhts may dazzle other road users.
Listed below are the examples oý prop‐
er switch settinþs. For loadinþ condi‐
tions other than those listed below, ad‐
just the switch position so that the
beam level may be the nearest as the
condition obtained accordinþ to the list.
Loadinþ condition Switch position
Driver only 0
Driver + Front
passenþer
0
Full passenþers
(includinþ driver)
1
Full passenþers
(includinþ driver) +
Maximum permis‐
sible loadinþ
2
Driver + Maximum
permissible load‐
inþ
3
Features oý your vehicle
4-78
To Next Page
Loading...
