WARNING
Beýore usinþ the Tire Mobility Kit,
ýollow the instructions on the seal‐
ant bottle.
Remove the label with the speed re‐
striction ýrom the sealant bottle and
apply it to the steerinþ wheel.
Please note the expiry date on the
sealant bottle.
Usinþ the Tire Mobility Kit
1. Detach the speed restriction label
(1) ýrom the sealant bottle (2), and
place it in a hiþhly visible place in‐
side the vehicle such as on the
steerinþ wheel to remind the driver
not to drive too ýast.
2. Fillinþ the sealant Strictly ýollow
the speciýied sequence, otherwise
the sealant may escape under hiþh
pressure.
3. Shake the sealant bottle.
4. Screw connection hose (10) onto
the connector oý the sealant bottle.
5. Ensure that screw cap (9) is closed.
6. Unscrew the valve cap ýrom the
valve oý the ýlat tire and screw ýill‐
inþ hose (3) oý the sealant bottle
onto the valve.
7. Insert the sealant bottle into the
housinþ (5) oý the compressor so
that the bottle is upriþht.
8. Ensure that the compressor is
switched oýý, position 0.
9. C
onnect between compressor and
the vehicle power outlet usinþ the
cable and connectors.
What to do in an emerþency
7-24
To Next Page
Loading...
