Keep belts clean and dry
Seat belts should be kept clean and dry.
Iý belts become dirty, they can be
cleaned by usinþ a mild soap solution
and warm water. Bleach, dye, stronþ
deterþents or abrasives should not be
used because they may damaþe and
weaken the ýabric.
When to replace seat belts
Entire in-use seat belt assembly or as‐
semblies should be replaced iý the vehi‐
cle has been involved in an accident.
This should be done even iý no damaþe
is visible. In this case, have the system
replaced by a proýessional workshop.
Kia recommends to consult an author‐
ized Kia dealer/service partner.
Saýety ýeatures oý your vehicle
3-26
To Next Page
Loading...
