Safety features of your vehicle
123
Seat
Reclining seatback
To recline the seatback:
1. Push the control switch forward or
backward to move the seatback to the
desired angle.
2. Release the switch once the seat
reaches the desired position.
Changing seat cushion tilt and
height
To change the height of the seat:
1. Pull the front portion (1) of the control
switch up to raise or press down to
lower the front part of the seat cush
-
ion.
Pull the rear portion (2) of the control
switch up to raise or press down to
lower the seat cushion.
2. Release the switch once the seat
reaches the desired position.
Adjusting lumbar support (if
equipped)
Type A
Type B
The lumbar support can be adjusted by
pressing the lumbar support switch on
the side of the seat.
1. Press the front portion (1) of the
switch to increase the support, or the
rear portion (2) of the switch, to
decrease the support.
2. Press the upper portion (3) of the
switch to raise the support, or the
lower portion (4) of the switch, to
lower the support.
To Next Page
Loading...
