Kia Sedona 2024 - 僅 Blind-Spot View Monitor Malfunction; 僅 Blind-Spot View Monitor Operation

Driver assistance system
726
Blind-Spot View Monitor (BVM)
Blind-Spot View Monitor opera -
tion
Operating switch
Turn signal switch
Blind-Spot View Monitor will turn on and
off when the turn signal is turned on and
off.
Blind-Spot View Monitor
Operating conditions
When the left or right side turn signal
turns on, the image in that direction is
displayed on the instrument cluster.
Off conditions
僅 When the turn signal turns off, the
image on the instrument cluster will
turn off.
僅 When the hazard warning flasher is
on, Blind-Spot View Monitor will turn
off, regardless of the turn signal sta
-
tus.
僅 When other important warning is dis -
played on the instrument cluster,
Blind-Spot View Monitor may turn off.
Blind-Spot View Monitor mal -
function
When Blind-Spot View Monitor is not
working properly, or the cluster display
flickers, or the camera image does not
display normally, have the function be
inspected by an authorized Kia dealer.
WARNING
僅 If the camera lens is covered with for -
eign material, Blind-Spot View Moni -
tor may not operate normally. Always
keep the camera lens clean.
僅 However, do not use chemical sol
-
vents such as strong detergents con -
taining high alkaline or volatile
organic solvents (gasoline, acetone
etc.). This may damage the camera
lens.
OKA4040097