Driver assistance system
1486
Remote Smart Parking Assist (RSPA)
Remote Smart Parking Assist
Operation
Remote Operation
1. Getting ready to remotely
move forward and backward
There are two ways to operate Remote
Operation.
Method (1): Using the function
with engine off
1. Within a certain range from the vehi
-
cle press the door lock ( ) button on
the smart key and lock all doors.
2. Press and hold the Remote Start but
-
ton ( ) within 4 seconds until the
engine starts.
Method (2): Using the function
with engine on
1. Park the vehicle in front of the space
where you want to use Remote Oper
-
ation function, and shift the gear to P
(Park).
2. Press and hold the Parking/View
( ) button to turn on Smart Parking
Assist. A message 'Under Remote
Control' will appear on the infotain
-
ment system screen.
3. Get out of the vehicle with the smart
key and close all doors.
僅 The infotainment system has to oper
-
ate properly to use Remote Operation
function.
僅 Drive below 5 km/h (3 mph) with the
engine on to use Remote Operation
function.
To Next Page
Loading...
