59
8
8
Maintenance Light bulbs
Replacing rear side marker, stop
and tail lamp (LED type)
If the rear stop and tail lamp (1), and rear
side marker (2) do not operate, have
your vehicle checked by an authorized
Kia dealer.
The LED lamp cannot be replaced as a
single unit because it is an integrated
unit. The LED lamp has to be replaced
with the unit.
A skilled technician should check or
repair the stop and tail lamp (LED), for it
may damage related parts of the vehicle.
Replacing high mounted stop
lamp (LED type)
If the high mounted stop lamp (LED) (1)
does not operate, have your vehicle
checked by an authorized Kia dealer.
1. The LED lamps cannot be replaced as
a single component because it is an
integrated unit. The LED lamps have
to be replaced with the unit.
2. A skilled technician should check or
repair the High Mounted Stop Lamp
(LED), for it may damage related parts
of the vehicle.
Replacing license plate lamp
(Bulb type)
1. Turn off vehicle and disconnect the
negative terminal from the battery.
2. Using a screwdriver, gently pry the
lamp assembly.
3. Remove the bulb by pulling it straight
out.
4. Install a new bulb in the socket.
5. Install the lamp assembly.
Be careful not to dirty or damage the
lens, lens tab, and plastic housings.
To Next Page
Loading...
