Driver assistance system
366
Blind-Spot Collision-Avoidance Assist (BCA)
- The turn signal or hazard waring
flasher is turned on
- The vehicle is not driven in the cen
-
ter of the lane when the function is
turned on or right after changing a
lane
- ESC (Electronic Stability Control) or
VSM (Vehicle Stability Manage
-
ment) is activated
- The vehicle is driven on a sharp
curve
- Vehicle speed is below 55 km/h (35
mph) or above 210 km/h (130 mph)
- The vehicle makes sharp lane
changes
- The vehicle brakes suddenly
Blind-Spot Collision-Avoid
-
ance Assist (BCA) (if
equipped)
Blind-Spot Collision-Avoidance Assist is
designed to help detect and monitor
approaching vehicles in the driver's blind
spot area and warn the driver of a possi
-
ble collision with a warning message and
audible warning.
In addition, if there is a risk of collision
when changing lanes or driving forward
out of a parking space, the function will
help avoid collision by applying the dif
-
ferential braking.
Blind-Spot Collision-Avoidance Assist
helps detect and inform the driver that a
vehicle is in the blind spot.
The detecting range may vary depend
-
ing on the speed of your vehicle. How
-
ever, even if there is a vehicle in the
blind spot area, the function may not
warn you when you pass by at high
speeds.
To Next Page
Loading...
