Maintenance
608
Light bulbs
Replacing map lamp (Bulb type)
Interior lamps
Prior to working on the Interior lamps,
ensure that the "OFF" button is
depressed to avoid burning your fingers
or receiving an electric shock.
1. Turn off vehicle and disconnect the
negative terminal from the battery.
2. Using a flat-blade screwdriver, gently
pry the lens cover from lamp housing.
3. Remove the bulb by pulling it straight
out.
4. Install a new bulb in the socket.
5. Align the lens cover tabs with the
lamp housing notches and snap the
lens into place.
Be careful not to dirty or damage the
lens, lens tab, and plastic housings.
Replacing map lamp (LED type)
If the map lamp (LED) (1) does not oper
-
ate, have your vehicle checked by an
authorized Kia dealer.
The LED lamp cannot be replaced as a
single unit because it is an integrated
unit. The LED lamp has to be replaced
with the unit.
A skilled technician should check or
repair the map lamp (LED), for it may
damage related parts of the vehicle.
Replacing room lamp (Bulb type)
Interior lamps
Prior to working on the Interior lamps,
ensure that the "OFF" button is
To Next Page
Loading...
