Driver assistance system
186
Forward Collision-Avoidance Assist (FCA) (Sensor fusion)
When the engine is restarted, Forward
Collision-Avoidance Assist will always
turn on. However, if 'Off' is selected after
the engine is restarted, the driver should
always be aware of the surroundings
and drive safely.
僅 If 'Warning Only' is selected, braking is
not assisted.
僅 The settings for Forward Safety
include 'Basic function' and 'Junction
Turning' (if equipped).
Forward Collision-Avoidance Assist will
turn off when ESC is turned off by press
-
ing and holding the ESC OFF button for
more than 3 seconds. The ( ) warn
-
ing light will appear on the cluster.
Warning Timing
With the engine on, select 'Driver Assis
-
tance → Warning Timing' from the Set
-
tings menu to change the initial warning
activation time for Forward Collision-
Avoidance Assist.
When the vehicle is first delivered, Warn
-
ing Timing is set to 'Normal'.
If you change the Warning Timing, the
warning time of other Driver Assistance
systems may change.
Warning Methods
You can adjust the Warning Methods
with the ignition switch or ENGINE
START/ STOP button in the ON position.
僅 Warning Volume : Select 'User Set
-
tings → Driver Assistance → Warning
Volume' on the LCD display or 'Set
-
tings → Vehicle → Driver Assistance
→ Warning Methods → Warning vol
-
ume' on the Infotainment system.
Even if '0' or 'Off' is selected, the func
-
tion's Warning Volume will not turn off
but the volume will sound as '1' or
'Low'
To Next Page
Loading...
