25
3
3
Safety features of your vehicle Seat
Seatback angle (VIP Lounge Seat)
To recline the seatback:
1. Push the control switch forward or
backward to move the seatback to the
desired angle.
2. Release the switch once the seat
reaches the desired position.
Leg support (VIP Lounge Seat)
To use the leg support:
1. Pull the leg support lever up and hold
it.
2. Adjust the angle (1) and length (2) of
the leg support while holding the leg
support. When using the leg rest,
move the seat to the inner position,
and then toward the back. If the seat
is not moved far back, it may come in
contact with the first row seat.
3. Release the switch and make sure the
leg support is locked in place.
The leg support length switch operates
after the leg support has been raised by
more than a certain angle to prevent
damage to parts due to floor interfer
-
ence.
VIP Lounge Seat (VIP Lounge
Seat)
VIP Lounge Seat distribute body pres
-
sure and concentrated weight on spe
-
cific body parts that occur while sitting in
the same position for a long period of
time. The seat relieves fatigue and dis
-
comfort by providing the optimal sit
position.
Take the following precautions when
using the VIP Lounge Seat:
僅 Do not use the VIP Lounge Seat while
the vehicle is moving. Using the VIP
Lounge Seat could increase the risk of
injuries in the event of a collision or
sudden stop.
僅 Do not use the VIP Lounge Seat while
the vehicle is moving. The shoulder
belt may not adhere to your chest
firmly.
To Next Page
Loading...
