Safety features of your vehicle
283
Seat
Removal and re-installation
2nd row seat
3rd row seat
To remove the headrest:
1. Raise it as far as it can go then press
the release button (1) while pulling the
headrest up (2).
To reinstall the headrest:
1. Put the headrest poles (3) into the
holes while pressing the release but
-
ton (1).
2. Adjust it to the appropriate height.
Make sure the headrest locks in position
after adjusting it to properly protect the
occupants.
After installing the headrest, make sure
that it is installed in the right direction.
A headrest installed reversely could
increase whiplash injury during rear
impact.
Make sure the headrest locks in position
after adjusting it to properly protect the
occupants.
Forward and backward adjust
-
ment (if equipped)
The headrest may be adjusted forward
or backward by pulling the lower part of
the headrest forward or backward to the
desired detent in the direction of the
arrow. Adjust the headrest so that it
properly supports the head and neck.
To Next Page
Loading...
