USING YOUR
iPod
WITH
THE
iK150
• Insert your iPod into the iK150
dock
before turning on the iK150.
•
Turn
off the iPod's SoundCheck option for optimal sound quality.
• The use of a
dock
adapter plate with your iPod
is
not required. Installing an adapter plate
along with the included isolation bracket
will
provide a more secure
fit
for your iPod,
reducing vibration.
• Third Gen and older iPods work by connecting their headphone output to the auxiliary
input on the rear of the iK150.
•
Tap
the SNOOZE button to mute/unmute.
USING
THE
ALARMS
• Tap the alarm1
or
alarm2 button to turn each alarm on and off.
• Use the quickstart
on
page 5 for instructions on how to set
an
alarm.
•
You
can set the alarm source to DOCK, FM1, FM2,
AM,
or buzzer.
• When
an
alarm goes off, hit the SNOOZE button to silence the alarm for 9 minutes.
USING
THE
RADIO
To
improve FM/AM radio reception, connect the included
FM
antenna to the coaxial jack on the rear of the
iK150 and/or the included
AM
Loop antenna to the AM terminals on the rear of the iK150,
You
may need
to experiment with antenna angle/position for optimal reception.
• Source to FM1, FM2, or AM (see page 5 for instructions).
•
Tap
the navigation knob to display radio station; rotate the knob to adjust radio frequency,
• Use the
I4ilI
and
~
buttons to seek to the next strongest station.
• Store the current station
in
memory by holding any of the
m1-m4
buttons.
• Recall a stored station by tapping the
m1-m4
memory button to which
it
is
assigned.
•
Tap
the SNOOZE button to mute/unmute.
Setting
the
Radio Region
1. Press setup then source within one second.
2.
Rotate the navigation knob to select between Region 1 and
2.
3. Press the navigation knob to save.
Region
1:
All
countries except North America and the Caribbean
Region
2:
North America (USA &Canada) and the Caribbean
6
iK150
DIGITAL
STEREO
SYSTEM
with
ALARM
To Next Page
