EasyManua.ls Logo

Kicker iKick iK150 - System Customization and Troubleshooting; Changing System Settings; Troubleshooting Common Issues

Kicker iKick iK150
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CHANGING SETTINGS
Tap
the setup button to enter setup mode.
You
can tap the setup button again to exit setup mode,
discarding any unsaved changes.
Rotate the navigation knob to scroll through settings while
in
setup mode.
Select a setting to edit by pressing the navigation knob.
Edit
the setting by rotating the navigation knob.
Save the setting by pressing the navigation knob.
Settings appear
in
the following order:
DISPLAY
Adjusts the display brightness.
SLEEP
Choose length of play time for the sleep timer from
5-120
minutes. The sleep timer
is
activated once
you save a value other than zero. Once activated, the sleep timer plays audio for the period of time you
selected then puts the iK150 into standby.
TREBLE
Boost or cut treble.
BASS
Boost or cut bass.
TIME
Adjust the time with the navigation knob. Press the knob to save and advance to
TIME
FORMAT.
4 TIME FORMAT
Choose between 12-hour and 24-hour time formats.
TROUBLESHOOTING
No sound:
1. make sure the iK150
is
connected to a power outlet that
is
known to work.
2.
make sure the iK150
is
turned on and not
in
standby (tap the navigation knob).
3.
make sure the iK150
is
set to the proper audio source (see page
5).
4.
try turning the navigation knob clockwise to increase volume.
5.
if
using the auxiliary input, make sure the connected device
is
playing and turned up.
6.
try re-docking your iPod.
7.
use the auxiliary input with your 3rd Gen and older iPod.
8.
the iK150 may be muted: try tapping the SNOOZE button.
9.
try unplugging/re-plugging the power.
No radio reception:
1. make sure the proper radio region
is
selected (see page
6).
2.
connect
an
antenna and try different angles, positions, and placements within your home/building.
No display/Dim display:
1. make sure the iK150
is
connected to a power outlet.
2.
make sure the iK150
is
turned
on
and not
in
standby (tap the navigation knob).
3.
increase the display brightness (see previous section).
4.
try unplugging/re-plugging the power.
The
DOCK
icon flashes continuously: This means your iPod/iPhone has failed to authenticate.
Remove your iPod/iPhone, wait 5 seconds, then re-dock your iPod/iPhone.
7