Kicker KX120.2 - Specifications; RMS and Dynamic Power Ratings; Physical Dimensions; Common Specifications

9
SPECIFICATIONS
Model KX120.2 KX150.2 KX200.2
RMS Power
In Watts, All Channels Driven
@ 13.8V, 4Ω Stereo, 0.085% THD 30 x 2 38 x 2 50 x 2
@ 13.8V, 2Ω Stereo, 0.2% THD 60 x 2 75 x 2 100 x 2
@ 13.8V, 4Ω Mono, 0.4% THD 120 150 200
Dynamic Power
In Watts, All Channels Driven
@ 14.4V, 4Ω Stereo 60 x 2 70 x 2 85 x 2
@ 14.4V, 2Ω Stereo 85 x 2 100 x 2 125 x 2
@ 14.4V, 4Ω Mono 170 200 250
Length With Shroud 12.75” 12.75” 16”
(32.38cm) (32.38cm) (40.64cm)
Specifications common to all models
Height:
2.5 inches / 6.35 centimeters
Width:
10.125 inches / 25.7 centimeters
Length WWithout SShroud:
Subtract 5” (12.7 cm) from chart above
Frequency RResponse:
20 Hz - 20 KHz, + 0/- 1 dB
Input SSensitivity:
170 mV - 5 V low level, 340 mV - 10 V high level
Signal-tto-NNoise RRatio:
>95 dB, a-weighted, re: rated power
Electronic CCrossover:
Variable high or low pass, 50 - 200 Hz, 12 dB/octave
KickBass BBoost:
Variable 0 to +18 dB boost @ 40 Hz