Kicker KX150.2 - PERFORMANCE; RMS Power Output Specifications; Specifications Common to All Models; CEA-2006 Compliant Ratings

11
KX Amplifiers
Specification
Performance
MODEL KX150.2 KX200.2 KX250.2
RMS POWER in Watts, All Channels Driven
@ 14.4V, 4Ω Stereo, <
1% THD+N 60 x 2 70 x 2 85 x 2
@ 2Ω Stereo, <
1% THD+N 75 x 2 100 x 2 125 x 2
@ 4Ω Mono, <
1% THD+N 150 200 250
@ 12.5V, 4Ω Stereo, 0.085% THD+N 30 x 2 35 x 2 50 x 2
@ 2Ω Stereo, 0.5% THD+N 60 x 2 75 x 2 90 x 2
@ 4Ω Mono, 0.5% THD+N 115 150 190
Length With EndKaps: 12.75” 12.75” 16”
(32.38cm) (32.38cm) (40.64cm)
SPECIFICATIONS COMMON TO ALL MODELS
Height: 2.5 inches / 6.35 centimeters
Width: 10.125 inches / 25.7 centimeters
Length Without EndKaps: Subtract 5” (12.7 cm) from chart above
Frequency Response: 20Hz - 20kHz, + 0/- 1dB
Input Sensitivity: 170mV - 5V low level, 340mV - 10V high level
Signal-to-Noise Ratio: >95dB, a-weighted, re: rated power
Electronic Crossover: Variable high or low pass, 50 - 200Hz,
12dB/octave
KickBass Boost: Variable 0 to +18dB boost @ 40Hz
Model KX150.2
60 x 2 @ 4 ohms, 14.4Vdc, 1% THD,
CEA-2006 (Watts)
Signal to Noise Ratio -102
CEA-2006 (ref: 1W, A-weighted)
Model KX200.2
70 x 2 @ 4 ohms, 14.4Vdc, 1% THD,
CEA-2006 (Watts)
Signal to Noise Ratio -98
CEA-2006 (ref: 1W, A-weighted)
Model KX250.2
85 x 2 @ 4 ohms, 14.4Vdc, 1% THD,
CEA-2006 (Watts)
Signal to Noise Ratio -98
CEA-2006 (ref: 1W, A-weighted)