Kicker SX700.4 User Manual

Instructions for recording amplifier details and keeping the sales receipt for warranty.

Details on advanced features like DSP, SORT, MOSFET, PAST, SAMS, and adjustable crossovers.

Explanation of the VFD indicators for amplifier status, settings, and adjustments.

Description of the nine soft-touch buttons for controlling the amplifier's functions.

Overview of connectors and indicators on the amplifier's end panel.

Guidance on selecting a location and securely mounting the amplifier.

Details on connecting RCA input/output jacks and using Hi-Lo signal adapters.

Illustrations of typical wiring configurations for stereo and bridged operation.

Explanation of using PAST jacks for signal transfer without Y-cables.

Guidance on proper power, ground, and remote turn-on wire gauge and fuse recommendations.

Instructions for connecting and using the remote bass control and daisy-chaining amplifiers.

Overview of the ISIS DSP system, menu structure, and navigation using the keypad.

Explanation of the menu system layout, including Default, Main, and System menus.

Accessing diagnostic tools for voltage, temperature, and runtime within the System menu.

Using Sick Bay for current status, history logging, and pink noise generation.

Assigning a custom name to the amplifier for display on the default screen.

Renaming and managing stored memory presets for quick recall of settings.

Selecting which amplifier(s) are controlled by the remote bass level controller.

Adjusting display brightness, temperature units, scroll speed, and screen saver.

Setting a lock code for security and resetting all adjustable settings to factory defaults.

Adjusting the single-band parametric equalizer for frequency, bandwidth, and boost/cut.

Setting the low-pass crossover frequency and slope for speaker protection and tuning.

Setting the high-pass crossover frequency and slope for speaker protection and tuning.

Switching the polarity of each amplifier channel's output between 0 or 180 degrees.

Muting individual amplifier channels for setup or testing purposes.

Selecting and adjusting the digital compressor settings for sound tweaking.

Locking the amplifier to prevent unauthorized access to settings.

Steps and considerations for unlocking the amplifier using the security code.

How to save custom settings into memory and recall them instantly.

Details on the default settings pre-loaded into Memory 1 through Memory 4.

Diagnosing problems when the amplifier shows no output or power.

Addressing issues like overheating, shutdown, low volume, and alternator noise.

Detailed explanations of CONTOUR, ATTACK, RED-LINE, and OFF Kompressor settings.

Technical specifications for RMS Power, Dynamic Power, and physical dimensions.

Comprehensive list of technical specifications common to all models.

Details on Kicker's limited warranty, coverage, exclusions, and service procedures.