Kicker DX200.4 User Manual

Choose a sound location, ensure ventilation, connect power, ground, and remote wires.

Explains common amplifier configurations for stereo, bridged, and simultaneous operations.

Sets crossover points and matches source unit output to amplifier input level.

Adjusts fader, applies bass boost, and selects automatic turn-on modes.

Diagnose issues based on Green LED status and no output scenarios.

Addresses alternator noise, poor stereo image, and ground-loop noise problems.

Troubleshoots issues with one channel having no output or poor performance.

Details RMS power output for the DX200.4 model under various impedance conditions.

Lists general specifications like frequency response, signal-to-noise, and input sensitivity.

Details warranty coverage, how to get service, and exclusions from warranty.

Outlines the expected service time for electronics repairs and potential delays.

Advise contacting local dealers and warns about hearing protection.

Details the certified total maximum power output and test results for the amplifier.