To Next PageTo Next Page
Need help?Do you have a question about the Kicker DXA500.1 and is the answer not in the manual?
General| Bass boost | 0 - 12 dB |
|---|---|
| Amplifier class | - |
| High pass filter | Yes |
| Input sensitivity | 250 mV |
| Low pass filter range | 50 - 200 Hz |
| High pass filter range | 25 - 200 Hz |
| Signal-to-Noise Ratio (SNR) | 95 dB |
| Number of amplifier channels | 2 channels |
| RMS power output per channel (2 Ohm) | 500 W |
| RMS power output per channel (4 Ohm) | 250 W |
| Product color | Black |
Weight and Dimensions| Depth | 82.1 mm |
|---|---|
| Width | 161.8 mm |
| Height | 86 mm |
Details RMS Power and Length for CX300.1, CX600.1, and CX1200.1 models.
Lists specifications common to all CX Series amplifiers, including dimensions and frequency response.
Provides guidance on selecting a mounting location and drilling holes for installation.
Details how to mount the amplifier vertically using specialized brackets.
Explains how to connect speaker outputs and RCA inputs, including high-level and low-level signals.
Specifies external fuse sizes and recommended power/ground wire gauges for each model.
Describes the +12V and DC Offset automatic turn-on modes for the amplifier.
Details how to set the input level switch for Hi or Low-level signals.
Explains the function and adjustment of the variable crossover and bass boost controls.
Guides on setting the input gain to match the source unit's output level correctly.
Information on using the optional CXRC remote bass level control for remote adjustment.
Diagnoses problems related to green LED off/on with no audio output.
Explains the meaning of red LED flickering or being constantly on.
Addresses issues of low output, alternator whine, and ground noise.
Details a promotional offer for a one-year extended warranty with qualifying installation kits.
Summarizes key power and signal-to-noise ratio specifications for CX Series amplifiers.
Outlines the two-year warranty for defects and conditions for coverage.
Explains how to obtain warranty service and the required return process.
Lists conditions and damages that are not covered by the warranty.
Advises users to contact their local KICKER dealer for international warranty policies.
