Need help?Do you have a question about the Kicker DXA250.1 and is the answer not in the manual?
General| Amplifier class | - |
|---|---|
| High pass filter | Yes |
| Input sensitivity | 250 mV |
| Low pass filter range | 50 - 200 Hz |
| High pass filter range | 25 - 200 Hz |
| Signal-to-Noise Ratio (SNR) | 95 dB |
| Number of amplifier channels | 2 channels |
| RMS power output per channel (2 Ohm) | 125 W |
| RMS power output per channel (4 Ohm) | 250 W |
| Product color | Black |
Weight and Dimensions| Depth | 82.1 mm |
|---|---|
| Width | 161.8 mm |
| Height | 86 mm |
Details RMS power, dimensions, frequency response, and signal-to-noise for DXA250.1 and DXA500.1.
Guidance on securely mounting the amplifier and connecting power, ground, and signal wires.
Information on minimum impedance for mono operation and associated wiring.
Covers +12V/DC Offset turn-on modes and Hi/Low level input signal selection.
Guidance on setting crossover frequency, input gain level, and bass boost.
Information on installing and using the optional CXARC remote bass level control.
Alerts users about potential hearing damage and system overheating from distorted audio.
Diagnosing amplifier problems based on LED indicators and common no/low output scenarios.
Addressing audio problems like engine noise and insufficient output levels.
Solutions for ground loop noise and precautions for jump starting the vehicle.
Details on amplifier specifications and the extended warranty program.
Procedures for warranty claims, including returns, exclusions, and service duration.
Procedures for international warranty claims and adherence to local noise regulations.
Crucial advice on protecting hearing from excessively loud audio levels.
To Next Page
