Need help?Do you have a question about the Kicker ZX400.1 and is the answer not in the manual?
General| Fuse Rating | 30A |
|---|---|
| Number of Channels | 1 |
| RMS Power at 1 Ohm | 400W |
| Frequency Response | 20Hz - 200Hz |
| Signal to Noise Ratio | 95 dB |
| Low Pass Crossover | 50-200 Hz |
Securely attach the amplifier to a structurally sound location for optimal performance.
Connect power, ground, and signal wires accurately to avoid shorts and ensure proper function.
Diagrams illustrating common setup configurations for mono channel operation.
Choose how the amplifier powers on: +12V, DC Offset, or Audio signal.
Select High or Low level signal input for optimal signal reception.
Match source unit output to amplifier input to avoid distortion.
Adjusts low-frequency boost (0-18dB at 40Hz) for enhanced bass response.
Set the frequency crossover point (50-200Hz) for proper audio filtering.
Allows remote adjustment of the amplifier's bass output level for convenience.
Steps for returning defective merchandise for warranty service.
Lists conditions and damages not covered by the product warranty.
Information on the expected turnaround time for warranty repairs.
To Next Page
