Need help?Do you have a question about the Kicker ZX2500.1 and is the answer not in the manual?
General| Subsonic Filter | 15Hz - 50Hz |
|---|---|
| Bass Boost | 0dB - 18dB |
| Fuse Rating | 250A |
| Number of Channels | 1 |
| Power Output (RMS) | 2500 Watts |
| RMS Power at 2 Ohms | 2500 Watts x 1 Channel |
| Signal to Noise Ratio | 95 dB |
| Impedance | 2 Ohms |
| Crossover | 50Hz - 200Hz |
| Amplifier Class | D |
| Low Pass Crossover | 50-200 Hz |
Lists the available KICKER ZX amplifier models (ZX300.1, ZX400.1, ZX500.1, ZX750.1).
Details RMS power output for each model at specified impedances and THD.
Lists physical dimensions like length, height, and width for the amplifiers.
Explains the selectable electronic crossover and variable bass boost features.
Covers input sensitivity, signal-to-noise ratio, and subsonic filter.
Provides instructions and considerations for physically mounting the amplifier securely.
Introduces essential wiring steps for power, ground, and signal connections.
Details connecting low-level RCA or high-level speaker outputs and using ZISL.
Specifies required external fuse sizes and wire gauges for each model.
Illustrates the correct connection of power, ground, and remote turn-on wires.
Describes the three automatic turn-on modes: +12V, DC Offset, and Audio.
Explains how to set input level and configure the crossover frequency.
Guides on setting input gain and adjusting bass boost for optimal sound.
Details the installation and use of the optional ZXRC remote bass control.
Diagnoses issues based on the RED badge light status (on/off).
Addresses problems indicated by the Protection LED (hot, voltage, short circuit).
Solves issues like no/low output, alternator noise, and reduced bass response.
Provides solutions for ground noise and alternator whine.
Details the three-year warranty extension with qualifying installation kits.
Presents power ratings and signal-to-noise ratios certified by CEA-2006.
Outlines the 3-month (standard) and 2-year (authorized dealer) warranty periods.
Explains the process for returning defective merchandise for service.
Lists exclusions such as improper installation, misuse, and accidental damage.
Advises contacting international dealers for country-specific warranty procedures.
Warns about potential hearing damage from high sound levels and distortion.
To Next Page
