To Next PageTo Next Page
Need help?Do you have a question about the Kicker ZX700.5 and is the answer not in the manual?
General| Channels | 5 |
|---|---|
| Power Output | 700 Watts |
| Signal-to-Noise Ratio | > 95 dB |
| Crossover Frequency | 50Hz - 200Hz |
| Bass Boost | 0 - 18 dB |
| Low-Pass Crossover Frequency | 50Hz - 200Hz |
| Input Voltage | 14.4V |
| Frequency Response | 20Hz - 20kHz |
| Crossover Type | Variable |
| Fuse Rating | 40A |
Details RMS power output for various impedance and channel configurations.
Lists key parameters like frequency response, signal-to-noise ratio, and input sensitivity.
Guidance on selecting a secure location and ensuring adequate ventilation.
Instructions for connecting source unit signals and power/ground wiring.
Explains selection of +12V, DC Offset, and Signal Sense turn-on methods.
Details input level, fader, crossover, gain, and bass boost controls.
Instructions for installing and using the optional remote bass controller.
Addresses issues like no output, protection LEDs, and thermal/voltage protection.
Solutions for alternator whine, channel issues, and ground noise.
Outlines the terms, coverage, and exclusions of the product warranty.
Details steps for obtaining warranty service and international policy information.
Information on contacting dealers for country-specific warranty procedures.
