Need help?Do you have a question about the Kicker ZX350.4 and is the answer not in the manual?
Height, Width, Frequency Response, Signal-to-noise Ratio, Input Sensitivity, Crossover, and Bass Boost.
Instructions for choosing a location and securely mounting the KICKER amplifier.
Guidance on connecting power, ground, and signal wires for amplifier installation.
Explanation of +12V, DC Offset, and Audio signal sense turn-on methods.
How to set input sensitivity and utilize the fader switch for signal routing.
Details on setting the crossover frequency and input gain for optimal performance.
Information on the Bass Boost feature and ZXRC remote bass level control.
Troubleshooting common issues indicated by the red badge and protection LED.
Steps to resolve issues with no output, single channel failure, or distorted sound.
Identifying and fixing alternator whine, ground noise, and stereo image issues.
How to obtain warranty service, including RMA procedures and required documentation.
Exclusions from warranty coverage, such as improper installation or misuse.
Expected turnaround time for warranty repairs and potential delays.
General| Channels | 4 |
|---|---|
| Frequency Response | 20 - 20, 000 Hz |
| Signal-to-Noise Ratio | > 95 dB |
| Input Sensitivity | 200 mV - 4 V |
| Bridged Power Output (RMS) @ 4 ohms | 180 watts x 2 channels |
| Crossover | 50-200 Hz, 12 dB/octave |
| Fuse Rating | 30A |
| Power Output (RMS) @ 2 ohms | 90 watts x 4 channels |
| Bass Boost | 0 - 12dB @ 45Hz |
To Next Page
