To Next PageTo Next Page
Need help?Do you have a question about the Kicker ZX200.2 and is the answer not in the manual?
Guidance on choosing a secure location and properly mounting the amplifier.
Instructions for connecting power, ground, and signal cables for the amplifier.
Procedure for installing the optional ZXRC remote bass level control.
Explanation of different modes for automatic amplifier turn-on (12V, DC Offset, Audio).
How to set the amplifier's input sensitivity for high or low-level signals.
Instructions for setting the internal crossover to OFF, HI, or LO.
Guidance on adjusting the input gain to match the source unit output.
Details on adjusting the variable bass boost feature for enhanced low frequencies.
How to adjust the variable crossover frequency for audio filtering.
Procedure for connecting the optional ZXRC remote bass control.
Diagnosing problems when the amplifier shows no output or incorrect badge light status.
Understanding reasons for the protection LED flashing or being continuously on.
Troubleshooting issues with one or more channels not producing sound.
Addressing alternator whine, poor stereo image, and ground noise.
Steps for returning defective merchandise for warranty repair or replacement.
List of conditions and damages not covered by the product warranty.
Information regarding the expected turnaround time for warranty service.
General
