Do you have a question about the Kicker ZX ZX200.2 and is the answer not in the manual?
Channels | 2 |
---|---|
Minimum Impedance Bridged | 4 Ohms |
Minimum Impedance Unbridged | 2 Ohms |
Frequency Response | 20 Hz - 20 kHz |
Signal to Noise Ratio | > 95 dB |
Input Voltage | 14.4V |
Bass Boost | 0 - 18 dB |
Crossover | Variable low-pass |
Bridged RMS Power | 200 Watts |
Crossover Frequency | 50Hz - 200Hz |
Input Sensitivity | 200 mV - 4 Volts |