7
3. Troubleshooting Guide
4. Introduction, Product Features And Specifications
This alarm detects products of combustion using a photoelectric sensor.
Ten (10) years after the unit was installed, powered up, and tested, this unit will au-
tomatically alert you that it is time to replace the unit. This is called “End of Unit Life”
mode. See Troubleshooting Guide. To help identify the date to replace the unit, a
label has been affixed to the side of the alarm.
• Powered by two AA batteries
• Reduced nuisance alarms
• Self-testing (see section 9)
• Easy installation
• Smoke Alarm Hush
TM
• Smoke Sensor: Photoelectric
• Temperature Operating Range: 4.4°C (40°F) to 37.8°C (100°F)
• Humidity Operating Range: up to 95% RH non-condensing
• Audible Alarm: 85+ dB at 3m (10ft), 3.0 to 3.5 KHz pulsing alarm
• This Class B digital apparatus complies with Canadian ICES-003
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause
undesired operation of the device.
To Next Page
Loading...
