Kidde I12080 Specifications

120V AC/DC Wire-in Smoke Alarm
Safety Light
Part# 21006379 Model i12080
Description
The Kidde i12080 is an AC/DC powered, ionization
smoke alarm that operates on a 120V power source
with 9V battery backup.
This alarm uses ionization sensing technology. Ionization
sensing alarms may detect invisible fire particles
(associated with flaming fires) sooner than photoelectric
alarms. Photoelectric sensing alarms may detect visible
particles (associated with smoldering fires) sooner than
ionization alarms.
Kidde strongly recommends that both ionization
and photoelectric smoke alarms be installed to help
insure maximum detection of the various types of
fire that can occur within the home.
The i12080 includes a quick connect wiring harness for
easy installation. The safety light illuminates to guide you
to safety. This smoke alarm is available in a 6-piece cut
case with tray for easy display. This unit is a UL Listed
product with a 10-year limited warranty.
Install Confidence
Easy Installation
•Frontbatterypulltaballowsbatteryactivation
without removing alarm from mounting bracket.
•Largemountingbasemakesmountingeasier,protects
surface paint from dirt and covers imperfections.
•Pre-strippedwiringharnesswitheasyoffcapdoes
not require stripper tool. Tinned strands increase
conductivity and wire nut grip
Fewer Callbacks
•Onebuttondesignforeasyoperationandless
confusion.OperatesSmartHush™andalarmtest.
•Batteryrundownprotectionwillshutdownalarm
memory when AC power is not present, reducing
low battery chirp.
•Dustcoverprotectssensorfromcontaminates
during construction reducing nuisance alarms
User-Friendly Features
•SafetyLightilluminatesthepathtosafety.
•Tamperresistlockingfeaturedetersalarmtheft
•AlarmmemoryflashesredLEDindicatingwhichunit
was the initiating alarm in interconnected system.
•Batterybackupprovidesprotectionincaseof
power failure.
•Interconnectablewithupto24devices(ofwhich
18canbeinitiating)includingsmoke,COandheat
alarms.Seeuser’sguideforcompleteinstructions.
– Ionization Sensing Technology
– Safety Light
– One button design (operates Smart Hush™ and test)
– Large mounting base
– 9V Battery Backup (included)
– Tamper resist feature
– Alarm memory
– P re-stripped wiring harness with tinned strands
U
L
SIGNALING
LISTED

Kidde I12080 Specifications

Power

power source	120VAC, 60Hz, 9V battery backup
audio alarm	85dB at 10ft
interconnects	Up to 24 Kidde devices

Operating Environment

temperature range	40˚F to 100˚F
humidity range	5% - 95% relative humidity

Weight and Dimensions

size	5.6” in diameter x 1.55” depth
weight	0.5 lb
dimensions	5.75 x 1.5 x 5.75 inches