2. Features
• VoiceMessageSystemthatalertsusertothefollowingconditions:
– Only for smoke alarm Hush
System announces “HUSH MODE ACTIVATED. MODE HUSH
ACTIVÉ.” when the unit is first put into HUSH Mode.
– Only for smoke alarm Hush
System announces “HUSH MODE CANCELLED. MODE HUSH
ANNULÉ.” when unit resumes normal operation after Hush
Mode has been cancelled.
– Only if button is pushed
System announces “CAUTION! CARBON MONOXIDE
PREVIOUSLY DETECTED! ATTENTION! MONOXYDE DE
CARBONE PRÉCÉDEMMENT DÉTECTÉ” when the unit has
detected CO concentrations of 100 ppm or higher.
– System announces “PUSH TEST BUTTON. APPUYER SUR LE
BOUTON D’ESSAI.” when the unit is powered up, reminding user
to activate the Test Button.
• The End of Product Life Alarm / Signal is a double chirp and red LED
flash every 30 seconds.
• End of Life Hush. At end of product life, the button can be pushed
to silence the end of life “chirps” for 3 days. Can be used 10 times
within 30 days.
• One “chirp” every 30 seconds coupled with an LED flash twice
a second is an indication that the alarm is malfunctioning. If this
occurs call the Product Support Line at 1-800-880-6788.
• Test/Reset button performs functions.
• HUSH Control Feature that silences the unit during nuisance alarm
situations.
• Peak Level Memory Feature which alerts user when the unit has
detected CO concentrations of 100 ppm or greater.
• Alarm Memory Feature that gives visual indication when an alarm
has sensed a hazardous condition.
• LED light indicates normal operation and alarm status.