WARNING!
• Deactivation of the alarm is permanent. Once the alarm has
been deactivated, it cannot be reactivated!
• Once deactivated, the alarm will NO LONGER DETECT
SMOKE OR CO.
• Once the alarm is deactivated the battery will be depleted
and the alarm will no longer function.
• Once the alarm has been deactivated, it cannot be mounted
onto the mounting plate or reactivated.
10. Deactivation of Alarm
WARNING! Failure to deactivate alarm as instructed prior to
disposal may create potential for lithium battery related fire or
hazard.
Break through label with a
screw driver.
Turn the screw to the “OFF”
location. This will deactivate the
alarm, stop the low battery or End
of Life “chirps” and render the
alarm safe for disposal by draining
the battery.
To Deactivate The Alarm:
Remove the alarm from the
mounting plate by rotating it in the
direction indicated by the arrows
on the cover of the alarm.
On back side of alarm, locate the
area on product label.
To Next Page
Loading...
Need help?
General
