WARNING: PLEASE READ CAREFULLY AND THOROUGHLY
•IMPORTANT:This carbon monoxide alarm is designed to detect
carbon monoxide gas from ANY source of combustion. It is NOT
designed to detect any other gas.
•
CAUTION: This alarm will only indicate the presence of carbon
monoxide gas at the sensor. Carbon monoxide gas may be present
in other areas. Never restart the source of a CO problem until it has
been fixed. NEVER IGNORE THE ALARM!
WARNING: This product is intended for use in ordinary
indoor locations of family living units. It is not designed to
measure compliance with commercial or industrial standards. It
is not suitable for installation in hazardous locations as defined
in your local building code.
•Theinstallationofthisdeviceshouldnotbeusedasasubstitutefor
proper installation, use and maintenance of fuel burning appliances,
including appropriate ventilation and exhaust systems.
•ThisalarmdoesnotpreventCOfromoccurring,norcanitsolveany
existing CO problem.
WARNING: This device is designed to protect individuals
from acute effects of carbon monoxide exposure. It may not
fully safeguard individuals with specific medical conditions.
If in doubt, consult a medical practitioner. Individuals with
medical problems may consider using warning devices which
provide audible and visual signals for carbon monoxide
concentrations under 30 PPM.
•Thisalarmhasnotbeeninvestigatedforcarbonmonoxidedetection
below 70 PPM.
•Thiscarbonmonoxidealarmrequiresacontinuoussupplyofelectrical
power – it will not work without power.
1. Limitations of CO Alarms
To Next Page
Loading...
Need help?
General
