5
Operating Instructions
Section 1: Location Guide
IMPORTANT: THIS MONITOR MUST BE PLUGGED INTO
A STANDARD 120 V AC, 60 Hz OUTLET, LOCATED IN A
CENTRAL LOCATION WITH CLEARANCE AROUND IT TO
ALLOW ALARM SOUNDS TO REACH THE MONITOR.
Avoid these locations:
• Dirty, dusty places, such as garages, furnace rooms, near
windows or external doors
• Insect infested areas
• Areas of direct sunlight
• Humid areas such as bathrooms, or any area above 95%
relative humidity (RH).
• Kitchens
• Any areas colder than 4.4°C (40°F) or hotter than
37.8°C (100°F). Extreme temperatures may affect the
performance of the RemoteLync.
• Near fluorescent lights as electronic noise may cause
nuisance alarms (install at least 0.3 m (1’) away).
• Avoid locations where sound waves might be blocked
from reaching the monitor, such as behind drapes or other
objects.
To Next Page
Loading...