Kidde SL177i User Manual

120VAC Dual Mode Strobe Light
for the Hearing Impaired
Model SL177i
Bright Strobe Light
Flashes to warn of a smoke, heat or
carbon monoxide hazard.
Green LED
Indicates AC power is being delivered
to unit.
Description
The Kidde SL177i is a 120VAC wire in unit that
provides a visual warning when part of an
interconnected system. This unit can be directly
interconnected with Kidde smoke alarms, heat alarms
and carbon monoxide alarms (a maximum of 24 devices
of which 18 can by initiating). When triggered by a
smoke alarm or heat alarm, it will produce a steady
flash warning. When triggered by a carbon monoxide
alarm it will produce an intermittent flash warning. The
SL177i has a 5 year limited warranty and is UL Listed.
ATTENTION! The model SL177 and SL177I strobe lights
are designed to notify hearing impaired individuals of
impending danger, they have no detection means and
MUST be used in conjunction with operating Smoke,
Heat, or Carbon Monoxide Alarms.
Consumer Benefits
The Kidde SL177i, used in conjunction with a smoke, heat
or carbon monoxide alarm, provides a bright visual signal
to warn of a smoke, heat or CO hazard. The Kidde Strobe
light benefits the hearing impaired, allowing a visual alert
of a danger. This unit also includes a tamper resist pin
that helps to deter thief and tampering.

Kidde SL177i Specifications

General

Brand	Kidde
Model	SL177i
Category	Carbon Monoxide Alarm
Language	English

Summary

Product Description and Consumer Benefits

Device Functionality and Attention Note

Details the SL177i as a 120VAC wire-in unit and stresses it requires other alarms for detection.

Visual Notification and Tamper Resistance

Highlights visual alerts for the hearing impaired and a tamper-resistant feature.

Architectural and Engineering Specifications

Interconnection and Device Requirements

Details power source, temperature range, junction box compatibility, and interconnect limits.

Technical Specifications

Key Device Properties

Lists model, UPC, power, electrical ratings, flash rate, size, weight, and warranty.

Installation of Strobe Light

Installation Compliance and Wiring

Advises adherence to local codes, NEC, NFPA 72, and specific wiring practices.

Ordering Information

Product Packaging Details

Provides details on gift box UPC, part numbers, pack quantities, dimensions, and weights.

User Information Section

Record Keeping for Support

Provides fields to record model number, date code, and date/place of purchase for customer support.

Important Safety Warnings

Device Limitations and Hazards

Warns about lack of detection, high voltage, AC power dependency, and strobe brightness.

Specifications and Applications

Interconnect Models and Light Output

Lists compatible interconnect models and details light output versus viewing angle.

Applications

Primary and Supplementary Placement

Guides on optimal placement for primary and supplementary visible signaling in rooms.

Recommended Locations and Locations to Avoid

Optimal and Undesirable Installation Sites

Advises on best locations and areas to avoid for effective strobe light operation.

Installation Instructions

Wiring Requirements and Safety Precautions

Details wiring requirements, NEC compliance, power source, and safety precautions.

Interconnect Wiring Diagram

SL177i 3-Wire Interconnect Diagram

Illustrates the wiring connections for the SL177i in a multi-station setup.

SL177 Wiring Diagram

SL177 2-Wire Direct Connect Diagram

Shows the wiring connections for the SL177 2-wire strobe light.

Mounting Instructions

Trim Ring and Connector Installation

Guides on attaching the trim ring to the electrical box and connecting the strobe light.

Tamper Resist Locking Pin

Mechanism and Removal

Explains the function of the tamper resist pin and how to remove it.

Testing and Operation

Alarm Triggered Testing Procedure

Details how to test the strobe light and alarms by activating a controlling alarm.

Maintenance

Strobe Light Cleaning and Removal

Provides instructions for cleaning the strobe light and referring to removal procedures.

Limitations of Visual Signaling Devices

Device Effectiveness and User Response

Discusses limitations such as dependency on alarms, power, and user perception.

Good Safety Habits

Escape Planning and Alarm Response

Offers guidance on developing escape plans and responding to visual alarms.

NFPA Required Protection

Smoke Alarm Installation Standards

Summarizes NFPA 72 requirements for smoke alarm placement in living units.

Service and Warranty Information

Defective Unit Return Procedure

Instructs users on how to return a defective unit for servicing or warranty claims.

Five Year Limited Warranty

Warranty Coverage and Liability

Details the five-year limited warranty terms, exclusions, and customer rights.

Kidde Accessories

Relay Modules and Heat Detector

Describes accessories like smoke relay, CO relay modules, and heat detectors.