Kilotech 851340 - General Precautions

4
General Precautions
Avoid lengthy exposure to heat
or cold.
Allow the scale to acclimate to normal room temperature before use.
Allow sufficient warm up time. Turn the scale on and wait for a few minutes to allow the internal
components a chance to stabilize before weighing.
Do not leave a load or weight
on a scale for a prolonged
period of time.
Do not tamper with the scale
yourself.
This will void the warranty. Contact your local distributor to properly
repair your scale.
Do not dissemble the scale
yourself.
This will void the warranty. Contact your local distributor to properly
repair your scale.
Do not load beyond max cap
the maximum weight limit.
Do not pull the plug by its cord
when unplugging.
Do not use the scale near fire
or corrosive gas.
Avoid contact with water and
DO NOT immerse the scale in
water.
Avoid placing the scale near a
heater.
It could cause a fluctuation to the indicator reading.
Always make sure to use a
Kilotech approved adapter.
Do not drop the scale or apply
a sudden shock.
Do not drag the scale.
Avoid exposing to other
electromagnetic devices.
These devices emit RF and can cause unstable readings. If your scale
should perform poorly, try moving the scale to a different room or
location.
Level the scale or make sure it
is on an even surface.
A scale used on an uneven surface may provide an unstable reading.
Scale should be used within
stated temperature & humidity
limits.