Kiloview E3 Quick Start Guide

E3 Dual-Channel Video Encoder
3G-SDI + 4K HDMI H.265 Video Encoder
（V2.12）
Leading solution provider of IP-Based video transmission
Quick Start Guide
Contents
 Packing List
 Device interfaces and functions
 Device connection, login and use guide
 Device upgrade and restore factory setting
Before using this product, it is recommended that you read the guide carefully. To ensure your personal safety and avoid physical or
electrical damage to the device, please strictly follow the instructions of this guide to install and use it under the guidance of
professionals. Incorrect electrical connections or physical installation may cause permanent damage to the device and even threaten
personal safety.
Due to continuous product updates, the product you purchased may have undergone changes compared to the content in this manual.
Please refer to the actual product inside the packaging for accurate information.

Kiloview E3 Specifications

General

Power Supply	DC 12V
Storage Temperature	-20°C to 60°C
Video Input	HDMI, 3G-SDI
Video Output	HDMI, 3G-SDI
Audio Input	HDMI, 3G-SDI (embedded)
Audio Output	HDMI, 3G-SDI (embedded)
Network Interface	Ethernet
USB	1 x USB Type-A
Supported Protocols	RTMP, RTSP, SRT
Video Encoding	H.264
Video Decoding	H.264