Need help?Do you have a question about the Kiloview E1 Series and is the answer not in the manual?
General| Video Input | SDI |
|---|---|
| Video Output | HDMI, SDI |
| Audio Input | 3.5mm audio jack |
| Audio Output | 3.5mm analog audio output |
| Encoding | H.264 |
| Network Interface | Gigabit Ethernet |
| Protocols | RTMP, RTSP, SRT, UDP |
| Management | Web GUI |
| Power Supply | DC 12V |
Steps for connecting the device to a network and initial configuration.
Steps for installing and connecting the E/G series encoders, including power, video, and network.
Steps for installing and connecting the M2 encoder, including power, video, and network.
Steps for installing and connecting the 1U rack-mounted encoder, including power, video, and network.
Steps to log in to the encoder's web interface using an Ethernet connection.
How to log in to the encoder using its default Wi-Fi hotspot (G series only).
Configuring the wired Ethernet connection, including IP address assignment and DHCP.
Configuring Wi-Fi connections, including connecting to existing networks or using the hotspot.
Configuration for using a USB 4G network card for internet connectivity.
Configuration for video encoding and various streaming media services like RTSP, RTMP, HLS.
To Next Page
