Name: Kiloview E1 Series
Brand: Kiloview
Rating: 5 (1 reviews)

To Next Page

To Previous Page

HD Video Encoders · User Manual

4.1.2 Connecting video signal

Connect the SDI/HDMI signal from the source (such as a camera) to the SDI/HDMI input port of the

device via a cable.

Note: HDMI and SDI device interface input and loop position is different. It is subject to the actual

device.

4.1.3 Connect network

Connect one end of the network cable to the encoder Ethernet port. The other end is connected to the

network switch or the computer's Ethernet port.

4.1.4 Connect WIFI antenna (for wireless encoder only)

Connect the WIFI antenna with the device antenna interface.

4.2 M2 installation and connection

4.2.1 Connect the power adapter

Connceting the power adapter (DC 12v) to the main product, then the product starts working

immediately.

Note: Please use the standard power adapter provided. Using other unqualified power supplies

may damage the device.

Questions and Answers:

Need help?

Do you have a question about the Kiloview E1 Series and is the answer not in the manual?

Kiloview E1 Series Specifications

General