Name: Kiloview E1 Series
Brand: Kiloview
Rating: 5 (1 reviews)

To Next Page

To Previous Page

HD Video Encoders · User Manual

6.4.3.3 RTMP Pushing (Live streaming)

Using RTMP pushing, the first thing is to make sure platform providing RTMP pushing address, otherwise

our encoders couldn’t do RTMP pushing (Currently some live streaming APP couldn’t provide RTMP

pushing address.)

Note: The principle of RTMP push stream is that it must be pushed from the encoder to the

platform. The computer/decoder then pulls the RTMP stream from the platform for playback. The

encoder cannot directly push the RTMP stream to the computer/decoder for playback.

YouTube live streaming

“Streaming point” is RTMP address given by platform (Take YouTube as an example). (Other platforms

are similar, if any questions please contact platform technical support for help).

1) Login to YouTube, get below address:

Streaming point should be like Server URL+Stream name/key.

For example: rtmp://a.rtmp.youtube.com/live2/9ja6-9u28-uz4j-8x6r

2) After you get the RTMP URL address, you need to set it up in the encoder. In the main stream of

H.264, there is a stream service option to be added. By adding a RTMP push, you can get a RTMP push

option. Click the settings button on the right side of the RTMP push, and you will enter the interface to

fill in the RTMP push configuration. The push address on YouTube platform is filled in the "push point",

and set "Enable pushing" to "Yes". Click “Save”, then RTMP will stream to YouTube.

Questions and Answers:

Need help?

Do you have a question about the Kiloview E1 Series and is the answer not in the manual?

Kiloview E1 Series Specifications

General