Name: Kiloview E1 Series
Brand: Kiloview
Rating: 5 (1 reviews)

To Next Page

To Previous Page

HD Video Encoders · User Manual

6.3.3 Audio signal source

Audio source “Auto selection” mode is automatically to select the embedded audio of the input video

source.

6.4 Encoding & Steam

6.4.1 Audio encoding parameter setting

Encoders can set audio encoding parameters. Click “Encoding &stream”, pull downward “Audio Encoding

Engine”, then entering into audio parameters setting. Audio encoding channel is forced to enable. Audio

encoding modes include AAC and G.711, optional. Audio sampling is chosen according to actual

situation. Channels consist of “Stereo” and “Mono”. Encoding bitrate is adjustable between16K-256K,

default is 64Kbps. One more detail: if encoder using TS-UDP protocol or needs using recording, then it

needs to choose “With ADTS header” under AAC format.

Note: Please do "Quick Reset" to take affect if you changed the 'Resample policy' or 'Sampling'

parameter.

Questions and Answers:

Need help?

Do you have a question about the Kiloview E1 Series and is the answer not in the manual?

Kiloview E1 Series Specifications

General