Kimberly-Clark SCOTT 09605

To Next Page

For available spare parts contact your sales representative.

Enclosed Tools Required:

Product Codes

09605 White, 09604 Black

SCOTT® STANDARD ROLL TOILET PAPER DISPENSER

(x4) (x4)

DISTRIBUTRICE DE PAPIER HYGIENIQUE EN ROULEAU STANDARD SCOTT®

Install Dispenser Bracket

Installation

IMPORTANT! For secure mounting, follow

instructions thoroughly. Ensure that proper

mounting hardware is used for appropriate wall

composition, as enclosed hardware may not be

compatible with your wall surface.

1. Locate the mounting bracket and screws

in the hardware packet provided. Using a

level, position the bracket approximately 36”

from oor and 7-9” from front edge of toilet

to center of bracket and use as a template

to mark holes for screws. Screw mounting

bracket into the wall, using marked holes as

a guide (Figure 1).

2. Temporarily mount the dispenser onto the

wall, sliding the bracket into place below the

back notches (Figure 2).

FORM 034171

Use correct

drill bit for

anchor size

*Check for ADA regional

& local installing/

mounting requirements.

7 - 9”

Need help?

Do you have a question about the Kimberly-Clark SCOTT 09605 and is the answer not in the manual?

The Scott® Standard Roll Toilet Paper Dispenser is a wall-mounted unit designed to hold and dispense standard rolls of toilet paper. This manual provides detailed instructions for installation, loading, and general usage, ensuring compliance with ADA requirements and proper functionality.

Function Description

The primary function of this device is to provide a convenient and hygienic method for dispensing toilet paper in commercial and public restrooms. It accommodates standard rolls, making it suitable for a wide range of facilities. The dispenser is designed for easy access and operation, promoting user satisfaction and efficient restroom maintenance. Its robust construction ensures durability and long-term performance in high-traffic environments. The dispenser's design also aims to minimize waste by allowing users to take only the necessary amount of toilet paper.

Important Technical Specifications

Product Codes: 09605 White, 09604 Black. These codes differentiate between the available color options, allowing for selection based on aesthetic preferences or existing restroom decor.
Mounting Dimensions: The dispenser requires a mounting bracket to be installed at a specific height. For ADA compliance, the bracket should be approximately 36 inches from the floor and 7-9 inches from the front edge of the toilet. This ensures accessibility for individuals with disabilities, adhering to the guidelines set forth by the Americans with Disabilities Act.
Hardware: The dispenser comes with all necessary mounting hardware, including screws and anchors. It is crucial to use the provided hardware to ensure a secure and stable installation. The hardware is specifically chosen to support the weight of the dispenser and its contents, preventing accidental detachment.
Material: While not explicitly stated, the visual representation suggests a durable plastic or composite material, designed to withstand frequent use and cleaning in commercial settings. The material is likely resistant to common cleaning agents and impacts, contributing to the dispenser's longevity.
Roll Capacity: The dispenser is designed for standard rolls of toilet paper. This implies a specific internal dimension to accommodate typical roll sizes, ensuring compatibility with readily available toilet paper products. The design likely allows for easy replacement of empty rolls.
Installation Tools: The installation process requires common household tools, including a drill, drill bits (specifically a 1/4-inch drill bit for anchors), a level, and a screwdriver. These tools are generally accessible, making the installation process straightforward for maintenance personnel or facility managers.

Usage Features

Easy Loading: The dispenser features a simple loading mechanism. To load a new roll, the user inserts the roll onto the left side of the dispenser by placing it over the angled notches on either side. This intuitive design minimizes the time and effort required for replenishment.
Dual Roll Capacity (Implied): While the initial loading instruction focuses on a single roll, the design with two distinct compartments and a sliding door suggests the capacity for two standard rolls. This feature is beneficial for high-traffic restrooms, reducing the frequency of roll changes and ensuring a continuous supply of toilet paper.
Hygienic Dispensing: The enclosed design protects the toilet paper from environmental contaminants, promoting better hygiene. Users only touch the paper they intend to use, further enhancing sanitary conditions.
ADA Compliance: The specified mounting height and design considerations ensure that the dispenser is accessible to individuals with disabilities, aligning with ADA guidelines. This is a critical feature for public and commercial facilities.
Visual Roll Indicator (Implied): Although not explicitly detailed, many dispensers of this type include a translucent window or a similar mechanism to allow staff to visually check the remaining toilet paper level without opening the unit. This helps in proactive replenishment.
Secure Closure: The dispenser likely incorporates a secure latch or lock mechanism to prevent tampering and theft of toilet paper, which is a common concern in public restrooms. This feature contributes to cost savings and operational efficiency.

Maintenance Features

Simple Cleaning: The smooth surfaces and enclosed design of the dispenser facilitate easy cleaning. Regular wiping with appropriate cleaning solutions helps maintain hygiene and appearance. The materials used are likely resistant to common disinfectants.
Durable Construction: Built for commercial use, the dispenser is designed to withstand frequent handling and environmental stressors. This durability reduces the need for frequent repairs or replacements, lowering maintenance costs.
Minimal Moving Parts: The design appears to have a limited number of moving parts, primarily for loading and dispensing. This simplicity reduces the likelihood of mechanical failures and simplifies any necessary repairs.
Easy Roll Replacement: The straightforward loading process ensures that maintenance staff can quickly and efficiently replace empty rolls, minimizing downtime and ensuring continuous service in restrooms.
Hardware Longevity: The provided mounting hardware is designed for long-term stability, reducing the need for re-tightening or replacement under normal usage conditions. Proper installation is key to maximizing hardware longevity.
Troubleshooting: The manual implicitly supports maintenance by providing clear installation and loading instructions, which are often the first points of reference for troubleshooting common issues. For example, if the dispenser is not dispensing correctly, checking the roll loading procedure is a primary step.

In summary, the Scott® Standard Roll Toilet Paper Dispenser is a practical, durable, and ADA-compliant solution for toilet paper dispensing in various institutional and commercial settings. Its user-friendly design, combined with robust construction and easy maintenance, makes it an efficient choice for managing restroom supplies.