EasyManua.ls Logo

Kimberly-Clark SCOTT SCOTTFOLD 09214 User Manual

Default Icon
3 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
For available spare parts contact your sales representative.
Enclosed
Product Codes
09214 White, 09215 Black
SCOTT® SCOTTFOLD™ FOLDED TOWEL DISPENSER
(x4) (x4)
DISTRIBUTRICE POUR ESSUIE-MAINS PLIÉS SCOTSCOTTFOLD™
Install Dispenser Bracket
Installation
IMPORTANT! For secure mounting, follow these
instructions thoroughly. Ensure that the proper
mounting hardware is used for the appropriate
wall type.
1. Assess wall surface material to determine if
screw anchors are required.
2. Mount the dispenser with the bottom edge
at the desired height using a minimum of 4
screws, usually 48” inches above the oor or
12” above the counter (Figure 1). Please refer
to local ADA guidelines for nal placement.
INSTALLATION
IMPORTANT! Suivre attentivement les instructions suivantes
pour installer l’appareil de façon sécuritaire. S’assurer
d’utiliser la quincaillerie qui convient au type de mur.
1. Évaluer le matériau de la surface du mur an de
déterminer si des vis d’ancrage sont nécessaires.
2. Monter la distributrice en plaçant le bord inférieur
Form 034168
1.
Tools Required:
Use correct
drill bit for
anchor size
*Check for ADA
regional & local
installing/mounting
requirements.
48” from oor
12” from
counter
Question and Answer IconNeed help?

Do you have a question about the Kimberly-Clark SCOTT SCOTTFOLD 09214 and is the answer not in the manual?

Kimberly-Clark SCOTT SCOTTFOLD 09214 Specifications

General IconGeneral
BrandKimberly-Clark
Model Number09214
CategoryDispenser
TypeFolded Towel Dispenser
CompatibilityScott Folded Towels
MountingWall Mount
MaterialPlastic
ColorWhite

Summary

Installation

Included Hardware

Lists all components provided in the hardware packet for installation.

Required Tools

Details the tools necessary for completing the dispenser installation.

Mounting Procedure

Step-by-step guide for securely mounting the dispenser to various wall types.

Optional Push Button Installation

Push Button Assembly

Instructions for installing the optional push button into the dispenser door.

Decorator Strip Installation

Decorator Strip Mounting

Details on how to install the decorative strip for enhanced appearance.

Related product manuals