Kimo LV 110 - Select Velocity Units; Select Airflow Units; Select Temperature Units

Select the measuring unit in temperature
The device is on and displays the measurements.
➢
Press on “Select” until “UNIT” blinks on screen with the unit temperature displayed below.
➢
Press on “OK”.
The unit currently used blinks at the bottom of the screen.
➢
Press on “Select” until the required unit appears: °C or °F.
➢
Press on “OK” to validate.
“UNIT” blinks on screen.
➢
Press on “On/Off/Esc” to return to the measurements display.
Select the measuring unit in airflow
The device is on and in airflow mode.
➢
Press on “Select” until&“UNIT” blinks on screen.
➢
Press on “OK”
The unit used currently blinks on screen.
➢
Press on “Select” until the required unit appears: m
3
/h, L/s, cfm or m
3
/s.
➢
Press on “OK” to validate the unit selection.
“UNIT” blinks on screen.
➢
Press on “On/Off/Esc” to return to the measurements display.
On/Off/
Esc
Select
0
L/s
25,4
°C
UNIT
SEL.
m3/h / L/s...
OK
SEL.
UNIT
L/s
UNIT
SEL.
m3/h
OK
SEL.
UNIT
m3/h
UNIT
SEL.
°C
SelectOK
On/Off/
Esc
OK
SEL.
UNIT
°C
UNIT
SEL.
°C / °F
SEL.
UNIT
°F
0,00
m/s
77,3
°F
Select the measuring unit in velocity
The device is on and in velocity mode.
➢
Press on “Select” until “UNIT” blinks on screen.
➢
Press on “OK”.
The unit currently used blinks on screen.
➢
Press on “Select” until the required unit appears: m/s, fpm or km/h.
➢
Press on “OK” to validate the unit selection.
“UNIT” blinks on screen.
➢
Press on “On/Off/Esc” to return to the measurements display.
SEL.
UNIT
fpm
UNIT
SEL.
m/s
UNIT
SEL.
m/s / fpm...
OK
On/Off/
Esc
0,00
fpm
25,4
°C
OK
SEL.
UNIT
m/s
Select