Kimo MP 120 - User Manual

PERFORM A MEASUREMENT
➢
Turn on the device by pressing on «On/Off/Esc».
The device displays its name «MP120», then performs an autozero.
➢
Connect the pressure tubes or a differential pressure element to the device (Pitot tube, Debimo blades,..).
The device displays the pressure or/and the measured velocity.
Manometer
MP 120
OK key
On/Off/Esc key
Hold/min/max key
Select key
Backlight key
PERFORM AN AUTOZERO
The device is on and displays the pressure and velocity measurements.
➢
Disconnect the pressure tubes.
➢
Press on «OK».
«Autozero» displays on the screen, the device performs an autozero, then returns to the measurement display.
DESCRIPTION OF THE DEVICE
FREEZE THE MEASUREMENT
During a measurement:
➢
Press on «Hold/min/max».
«Hold» appears on the screen and the measurements are frozen.
➢
Press on « On/Off/Esc» to exit the hold function
The device returns to the measurement display.

Summary

Description of the Device

Perform a Measurement

Perform an Autozero

Freeze the Measurement

Display the Minimum and the Maximum

Adjust the Device

Device Drop-down Menu

Navigating the device's menu structure to access various settings and functions.

Measure and Display Velocity

Instructions for connecting a differential pressure element to measure and display air velocity.

Select Measuring Unit in Pressure

Guide to changing the pressure unit (e.g., Pa, mmH2O, inWg) displayed on the manometer.

Select Measuring Unit in Velocity

Adjust the Auto Shut-off

Activate or Deactivate Keys Beep

Adjust the Coefficient

Adjust the Temperature

Adjust the Atmospheric Pressure

Activate the Backlight

Change the Batteries

Kimo MP 120 Specifications