Kimo VT110 User Manual

Hotwire thermo-anemometer
VT110 - VT115
DESCRIPTION OF THE DEVICE




Airflow direction
Red point :
landmark
Protective tube of the
sensitive element (1)
Sensitive element (velocity)
Sensitive element
(temperature)
Bottom of the
hotwire probe
Airflow direction
White point :
landmark
Tube de protection de
l'élément sensible (1)
Sensitive element (velocity)
Sensitive element
(temperature)
Bottom of the telescopic
hotwire probe
➢
Turn on the device by pressing on «&&».
The device displays its name «VT110» or «VT115» then the measured values.
➢
Put the probe to the required location.
The device displays the measurements of velocity or airflow and of temperature.
PERFORM A MEASUREMENT
 !" #! !"
●
$% ! !"&! !$%"'(
$)
●
* % !" ! )
●
* %! !"  ! )

Kimo VT110 Specifications

General

Air temperature range	-20 to +80 °C
Display	LCD
Air temperature accuracy	±0.4 °C
Resolution	0.1 °C
Units	m/s, °C, m³/h, cfm
Type	Thermo-anemometer

Summary

Description of the Device

Perform a Measurement

Perform an Average in Velocity

Measure and Display the Airflow

Freeze the Measurement

Display the Minimum and the Maximum

Adjust the Device

Select the measuring unit in velocity

Allows selection of the velocity measurement unit (fpm, km/h, m/s) for the device.

Select the measuring unit in airflow

Allows selection of the airflow measurement unit (m³/h, L/s, fcm, m³/s) for the device.

Select the measuring unit in temperature

Allows selection of the temperature measurement unit (°C, °F) for the device.

Adjust the auto shut-off

Activate or deactivate the keys beep

Activate the Backlight

Change the Batteries