Need help?Do you have a question about the Kimo DBM610 and is the answer not in the manual?
General| Brand | Kimo |
|---|---|
| Model | DBM610 |
| Category | Measuring Instruments |
| Language | English |
Key features of the DBM610 airflow meter, including range and ease of use.
Detailed technical specifications for airflow, air velocity, temperature, and thermocouple types.
Description of the airflow meter's base, including external and internal components.
Details about the measurement grid, its components, and function.
Features and components of the removable electronic housing.
Functions of the device when used in airflow meter mode.
Functions of the device when used in micromanometer mode.
Information on battery types and charging methods for the electronic housing.
Description of the airflow meter hoods and their features.
Step-by-step instructions for assembling the airflow meter frame.
Procedure for attaching and setting the cloth onto the airflow meter frame.
Instructions for inserting and positioning the rods for the hood.
Steps to power on and initiate the airflow meter.
Configure correction coefficient, units, damping, and standardized airflow.
How to perform automatic and aggregated averages of measurements.
Steps to power on the device in micromanometer mode.
Configure sensor, surface, units, damping, solenoid valve, and thermocouple.
How to select units and set damping for readings.
How to enable/disable solenoid valve and select thermocouple type.
Set compensation temperature and activate standardized airflow.
How to enable or disable specific measurement types.
Instructions for using the Matrix grid for air velocity measurements.
Overview and steps for automatic and point-by-point averages.
How to perform automatic point-by-point averaging over a duration.
Procedure for performing an autozero to offset sensor drift.
How to use the Hold function to freeze measurement values.
How to access and view stored measurement datasets.
Steps to delete recorded datasets from the device.
How to configure the device's date and time settings.
How to select the user interface language.
How to configure the automatic power-off timer.
How to adjust the display brightness.
How to adjust the display contrast.
How to enable or disable audible beeps from the keyboard.
How to find software version and serial number.
How to check the device's calibration date.
How to find contact information for customer support.
To Next Page
