7. Set the device
This part allows to set the different general parameters of the device.
➢ Go to "Menu".
➢ Go to "Settings" with left and right arrows.
➢ Press OK.
7.1. Set date and time
➢ Go to "Date/Time" line then press OK.
➢ Set date and time with arrows.
➢ Press OK to validate and back to "Settings" sub-menu.
7.2. Set language
➢ Go to "Languages" line then press OK.
➢ Select the required language (French or English) with up and down arrows.
➢ Press OK to validate.
7.3. Set automatic shut-off
➢ Go to "Extinction" line then press OK.
➢ Select OFF to deactivate it or the time before automatic shut-off (15, 30, 45 min or 1h).
➢ Press OK to validate.
7.4. Set brightness
➢ Go to "Brightness" line then press OK.
➢ Select the required level of brightness (from 1 to 9 or AUTO) with up and down arrows.
➢ Press OK to validate.
7.5. Set contrast
➢ Go to "Contrast" line then press OK .
➢ Select the required level of contrast (from 0 to 3) with up and down arrows.
➢ Press OK to validate.
7.6. Activate or deactivate beep
➢ Go to "Beep" line then press OK.
➢ Select ON to activate or OFF to deactivate beep of the keyboard of device
➢ Press OK to validate.
Set the device 19
To Next Page
Loading...
Need help?
General
